WL200 Conduct sensor/control w/PP J-box

FEATURES:

• Reliable switching in difficult applications
• Works in water, wastewater and other conductive liquids
• 3-probe system controls up to two levels
• Easy to install in standard NPT fitting
• Includes three stainless steel electrodes

ConductivityLevel Controllers Product Description
GlobalWater’s WL200 Conductivity Level Controllers provide reliable,cost effective, 2-point level control in applications where amechanical switch would foul and an ultrasonic device could beinaccurate.The Conductivity Level Controller has no movingparts and may be used in water, wastewater and even slurries orother heavy bodied conductive liquids.

The WL200 Conductivity Level Controller’s durable polypropylenesensing head with its integral junction box includes a standard 1”NPT fitting that allows for quick installation just about anywhere. The Conductivity Level Controller’s three 24 inch long 316 stainlesssteel electrodes are easily cut to length for accurate on/off orhigh/low point level settings.

The WL200 Conductivity Level Controller includes a sensitivityadjustment for reliable operation in a variety of conductiveliquids.The Conductivity Level Controllers may be DIN rail orsurface mounted and operate on standard 115 VAC current, which isstepped down to 12 volts at the electrodes.Only an extremelysmall amount of current is necessary for the unit to perform. As with any device, a properly installed and grounded system posesno electrical hazard.

The WL200 Conductivity Level Controller comes complete withsensing head, three 24” electrodes, controller with adjustablesensitivity, 8-pin socket, and 10 ft cable.For deeperapplications use the WL200-EXT Conductivity Level Controllerextension kit which includes three 24 inch probes, couplers andspacers.

ConductivityLevel Controllers Specifications

Sensor Head

Body/J-Box: Reinforced polypropylene

Probes: 316 Stainless Steel electrodes w/sheath

Probe Length: 24” standard (may be coupled together for max. 72”)

Mounting: 1″ NPT

Pressure: 30 PSIG, maximum

Temperature: 100°C, maximum (212°F)

Other: Integral NEMA6 (IP68) junction box with 10′ cable

Controller

Sensing Inputs: 3 maximum (High, Low, Common)

Sensing Voltage: 12 VAC

Sensing Resistance: Adjustable to 100,000 Ohms

Input: 120 VAC 50/60 Hz

Output: Contact rating 5 Amps resistive @ 240 VAC, form SPDT

Mounting: 8-pin socket mount, surface or DIN rail-mountable

Weight: 1.2 lbs (0.5 kg)

Dimensions: 28-1/2” long x 2-1/8” diameter (72.4cm long x 5.4cm diameter)