The Marine Wind Tracker has specialfeatures for shipboard use.
Wind speed is displayed in your choice of units: KNOTS, MPH, KM/H, M/S.Maximum wind speed is also shown. Wind direction information is clearlydisplayed on a circular pattern of LEDs. Bold front panel graphics give aquick indication of wind angle relative to vessel heading. Brightness controlallows adjustment for best viewing in any light. Luminous front panel markingsallow viewing even in a darkened pilothouse. 4-20 mA inputs, Serial NMEA, andVoltage outputs are standard on the Marine Wind Tracker. Alarms for both windspeed and wind direction are included. The Marine Wind Tracker is very compactfor easy mounting on vertical bulkheads or consoles. Model 06260 Protectiveenclosure offers extra protection for wet or dusty locations.
Specifications
Wind Speed Range:
0-100 MPH
0-50 M/S
0-200 KM/H
0-100 KNOTS
Wind Direction Range:
0-180 degrees (port & starboard)
Voltage Outputs: 0-5 VDC Full Scale for WS & WD
NMEA Inputs/Outputs: Standard
Alarm Relays: Normally Open contacts for WS & WD
Remote Displays: 16 maximum
Power Requirement: 12-30 VDC, 4.5 W
Dimensions:
144 mm (5.65 in) x 144 mm (5.65 in) x 36 mm (1.4 in)
Weight: 1 lb (0.45 kg) Shipping Weight: 3 lb (1.4 kg)
| OrderingInformation | Model |
| MARINE WIND TRACKER / 110V,60Hz | 06206 |
| MARINE WIND TRACKER / 230V,50-60Hz | 06206H |



![Navico 3G/4G Radar to Halo Dome Converter Cable to Use w/Old Cable [000-14551-001]](https://www.ironfixaccessories.com/wp-content/uploads/2026/10/navico-3g-4g-radar-halo-dome-converter-cable-use-w-old-cable-000-14551-001.webp)
